Summary: Improve machining efficiency is not only an update to process concepts, but also an improvement in management concepts. Reasonably determine the manufacturing precision of the parts and the assembly accuracy of the product. Second, when designing the design measures for mechanical processing productivity, under the premise of ensuring the performance of the product parts, the parts structure should have a good processing process,Automotive Roll Forming Production Line supplier and the processing of good processing has been used to reduce processing difficulties, improve labor productivity.

Selecting the workpiece material of the workpiece material workpiece material in the chipping performance, directly affects the cutting efficiency, power consumption, and the surface quality of the part. Improve the cutting amount, increase the cutting speed, feed amount, and back knife, can shorten the basic time, which is an effective method for improving productivity in machining.

The reduction in the tool change time is mainly achieved by improving the mounting method of the tool and using the tool fixture. When a large amount of production is large, it is widely used with efficient pneumatic and liquid jigs to shorten the time of loading and unloading.

In order to cause all or part of the auxiliary time and the basic time, multi-station clamps and continuous processing methods can be employed., to reduce the tool of the tool loading and the time required for the knife. At this point, it is an important direction to increase productivity.

When designing the product, the workpiece material that should be used as much as possible to improve the workpiece material with good cutting performance and the heat treatment measures that can improve the material cutting performance will increase the productivity and reduce the cutting and processing costs. Motive time of the table machine; Second, there is an automatic parking device for each machine. 

The overall performance is very good. So, what is the daily management standard of this kind of turning and milling machine? First of all, the new generation of milling complex machines has stronger functions and is suitable for commercial users in different fields.

Before operating such Automotive stainless auto trim stamping decorative industrial processing equipment, relevant technical personnel need to be systematically trained and evaluated to ensure that future operations are more standardized and correct. The walking mechanism of the compound center still cannot meet the production and processing safety standards set by the company, so please remember that it can no longer continue to operate and use, and the brand manufacturer’s maintenance personnel must be notified to deal with the failure to ensure that it can be put into trial operation after being discharged from the hospital . 　　

In the event of a malfunction during daily operation, the operator should stop using it in accordance with the prescribed procedures, and promptly notify the equipment department staff to come for inspection and maintenance. In the operation of such industrial equipment, it must be kept away from heat sources and open flames. Second, before operation, each technician needs to be familiar with the relevant instructions of the equipment.

There are operating specifications and preventive measures. After several years of improvement and perfection, the production and processing efficiency has also been improved, and the equipment structure has also been simplified, which is suitable for more fields. Only by mastering every detail can we ensure that the performance of the equipment is more perfect.Daily management specifications of lathes and milling machines 

If this machining center is used by someone else, ask them if they have adjusted the phase sequence of the forward and Custom automotive exterior Manufacturers reverse motor of the tool magazine without permission. The operator will use the reset button to change the calculation method, or simply press the emergency stop button. Try to let the machining center tool library itself complete the entire M6 cycle, so it will certainly not be messy.

When there is an alarmgive an alarm), see which signal in the T picture did not arrive or was caused by a flashing. Communicate with the manufacturer you purchased. How to deal with the chaotic tool in the tool magazine of the machining center: Another possibility is that the T-map is not rigorously authorized. After manual tool magazine reset (reset), tool magazine disorder may occur. Looking for a knife nearby, the tool library was messed up.

The tool change process is stuck due to insufficient tool change air pressure during normal tool change. In addition, after the tools are out of order, remember not to operate the operation panel keyboard of the machining center. This situation may be caused by a problem with the upper and lower processing ports of the machining center.

If the manufacturer has after-sales service or after-sales maintenance, you can ask their technicians to check the safety. If there is a high-low shift function, also check the low-high-low signal. If this is done, the tool magazine can only rotate in one direction, so it can’t. Check whether the counter switch is loose and whether there is any knife jamming.

In Japan, Germany and other countries, after the finishing process, the maintenance must be stopped with flannel. In the subsequent processes, the machined surface can be used as the positioning reference , This kind of positioning surface is called fine datum. classification Design datum: The datum used to determine the position of other points, lines and surfaces on the part drawing is called the design datum. concept Mechanical parts are composed of several surfaces.

Before entering the work position, all employees should check whether their clothing meets the work requirements. When operating, you must concentrate your thoughts, chat and cooperate with each other. After the machine is started, one person transports materials and operates the machine. If you have any questions, please consult this site, the website address:

Before the machine works, check whether the moving parts are filled with lubricating oil, then start and check whether the clutch and brake are normal, and run the machine idling for 1-3 minutes. After installation and adjustment, move the flywheel by hand for two test punches to check whether the upper and lower molds are symmetrical and reasonable, whether the screws are firm, and whether the blank holder is in a reasonable position.

If you find that you are unwell, CNC Machining Automotive Parts you must leave the job immediately and report it to the leader.When leaving get off work, turn off the idle power and arrange the finished products, side materials and sundries on the job to ensure a clean and safe working environment.Hardware is now a hot industry in this society, and hardware processing is to make its quality more perfect, so do you want to know what the steps of hardware processing look like? Let's find out together. However, remember that the operating procedures must be consciously followed. 

Massage chair accessories fine metal processing parts are mainly manifested in batch processing.The processing technology path has great uncertainty. The metal stamping parts processing factory has outstanding stamping and Automotive Interior Trim Cnc Suppliers forming functions.dgjiaxin100. The professional characteristics of massage chair accessories hardware processing.com.

The small-batch production process mainly includes product proofing, model recognition, product batch processing and other procedures; however, the processing and production method and cycle of each component of the fine metal processing parts are different from the processing technology roads of ordinary products.If the thickness of the material is too large, it will not only directly affect the quality of the parts, but also May lead to the presentation of waste products.

If there is a process to handle, you need to fill in a lot of process transfer orders. The material with good appearance quality is not easy to break during molding, not easy to scratch the mold, and the appearance quality of the parts is also good. 

Because the hardware manufacturing enterprises of massage chair parts are mainly discrete processing, the quality and productivity of products largely depend on the technical level of workers, and the degree of automation is mainly at the unit level, such as CNC machine tools and flexible manufacturing systems

The selection requirements of stamping parts materials for metal stamping parts processing plants:The thickness of the material should be in line with the national standard hardware stamping parts processing factory hardware parts stamping because a certain mold gap is only applicable to materials with a certain thickness range. 

The process requirements of the parts are mainly the structural size, processing range and accuracy requirements of the parts. The function that the CNC lathe should have is to make preparations, and the prerequisites for reasonable selection of CNC lathes meet the process requirements of typical parts. Choose based on reliability. Reliability is a guarantee for improving product quality and production efficiency.

The process requirements of typical parts are mainly parts. Finally, choose a precision metal processing technology with reasonable performance, which can achieve no waste, no idleness, etc. If you want to know more about CNC lathe processing

The balance of comprehensive processing capacity of parts processed by cnc CNC lathes is a single CNC grinder, it is difficult to complete all the processing content of a part, it needs to be matched with the processing procedures of other equipment, so there is a requirement for the balance of production cycle and workshop production capacity . The general imported systems are Japan's Sanling, Fanuc,Germany, and the domestic ones are Guangshu, Kanedi, and the new generation are more commonly used. The structure size, processing range and accuracy requirements of the machine.

CNC lathe processing, add the batch of CNC lathe processing workpieces, draw up the functions that the CNC lathe should have, make preparations, Automotive trim stamping decorative Company and reasonably select the prerequisites of the CNC lathe to meet the process requirements of typical parts. Choose based on reliability. According to the accuracy requirements, that is, the dimensional accuracy, positioning accuracy and surface roughness of the workpiece, the control accuracy of the CNC lathe is selected.

First of all, prepare to determine the process requirements of typical parts and the batch of processed workpieces in the early stage. To Because the processing of hardware requires very high precision, automation and high efficiency. Generally, the more users, the higher the reliability of the CNC system.