Such as the cleaning of air filters and electrical cabinets, and the cleaning of printed circuit boards.The inspection of the machine tool cable is mainly to check the moving joints of the cable and whether there are faults such as poor contact, disconnection and short-circuit at the corners of the cable.

The parameter memory of some CNC systems uses CMOS components, and the stored content is maintained by battery power when the power is off. When a low voltage alarm occurs, the battery must be replaced in time, and the control system must be energized, otherwise the stored parameters will be lost and the CNC system will not work.Long-term maintenance of the CNC lathe is not required.

When the CNC lathe is not in use, the CNC system should be energized frequently,auto trim stamping decorative Company and if the machine is locked, run it dry. In the rainy season when the air humidity is relatively high, the electricity should be turned on every day, and the heat of the electrical components themselves should be used to drive away the moisture in the CNC cabinet to ensure the stable and reliable performance of the electronic components.

Various types of machine tools usually consist of the following basic parts: supporting parts, used to install and support other parts and workpieces, bear their weight and cutting forces, such as bed and column, etc.; speed change mechanism, used to change the speed of the main movement; feed The mechanism is used to change the feed rate; the headstock is used to install the spindle of the machine tool; the tool post, the tool magazine; the control and manipulation system; the lubrication system; the cooling system.

Machine tool attachments include machine tool loading and unloading devices, manipulators, industrial robots and other machine tool attachments, as well as machine tool accessories such as chucks, suction cup spring chucks, vices, rotary tables, and indexing heads. 

Megosztás a facebookon

The process requirements of the parts are mainly the structural size, processing range and accuracy requirements of the parts. The function that the CNC lathe should have is to make preparations, and the prerequisites for reasonable selection of CNC lathes meet the process requirements of typical parts. Choose based on reliability. Reliability is a guarantee for improving product quality and production efficiency.

The process requirements of typical parts are mainly parts. Finally, choose a precision metal processing technology with reasonable performance, which can achieve no waste, no idleness, etc. If you want to know more about CNC lathe processing

The balance of comprehensive processing capacity of parts processed by cnc CNC lathes is a single CNC grinder, it is difficult to complete all the processing content of a part, it needs to be matched with the processing procedures of other equipment, so there is a requirement for the balance of production cycle and workshop production capacity . The general imported systems are Japan's Sanling, Fanuc,Germany, and the domestic ones are Guangshu, Kanedi, and the new generation are more commonly used. The structure size, processing range and accuracy requirements of the machine.

CNC lathe processing, add the batch of CNC lathe processing workpieces, draw up the functions that the CNC lathe should have, make preparations, Automotive trim stamping decorative Company and reasonably select the prerequisites of the CNC lathe to meet the process requirements of typical parts. Choose based on reliability. According to the accuracy requirements, that is, the dimensional accuracy, positioning accuracy and surface roughness of the workpiece, the control accuracy of the CNC lathe is selected.

First of all, prepare to determine the process requirements of typical parts and the batch of processed workpieces in the early stage. To Because the processing of hardware requires very high precision, automation and high efficiency. Generally, the more users, the higher the reliability of the CNC system. 

Megosztás a facebookon