Such as the cleaning of air filters and electrical cabinets, and the cleaning of printed circuit boards.The inspection of the machine tool cable is mainly to check the moving joints of the cable and whether there are faults such as poor contact, disconnection and short-circuit at the corners of the cable.

The parameter memory of some CNC systems uses CMOS components, and the stored content is maintained by battery power when the power is off. When a low voltage alarm occurs, the battery must be replaced in time, and the control system must be energized, otherwise the stored parameters will be lost and the CNC system will not work.Long-term maintenance of the CNC lathe is not required.

When the CNC lathe is not in use, the CNC system should be energized frequently,auto trim stamping decorative Company and if the machine is locked, run it dry. In the rainy season when the air humidity is relatively high, the electricity should be turned on every day, and the heat of the electrical components themselves should be used to drive away the moisture in the CNC cabinet to ensure the stable and reliable performance of the electronic components.

Various types of machine tools usually consist of the following basic parts: supporting parts, used to install and support other parts and workpieces, bear their weight and cutting forces, such as bed and column, etc.; speed change mechanism, used to change the speed of the main movement; feed The mechanism is used to change the feed rate; the headstock is used to install the spindle of the machine tool; the tool post, the tool magazine; the control and manipulation system; the lubrication system; the cooling system.

Machine tool attachments include machine tool loading and unloading devices, manipulators, industrial robots and other machine tool attachments, as well as machine tool accessories such as chucks, suction cup spring chucks, vices, rotary tables, and indexing heads. 

Megosztás a facebookon